Toward the Rational Design of Galactosylated Glycoclusters That Target Pseudomonas aeruginosa Lectin A (LecA): Influence of Linker Arms That Lead to Low‐Nanomolar Multivalent Ligands

Anti‐infectious strategies against pathogen infections can be achieved through antiadhesive strategies by using multivalent ligands of bacterial virulence factors. LecA and LecB are lectins of Pseudomonas aeruginosa implicated in biofilm formation. A series of 27 LecA‐targeting glycoclusters have been synthesized. Nine aromatic galactose aglycons were investigated with three different linker arms that connect the central mannopyranoside core. A low‐nanomolar (K_d=19 nm , microarray) ligand with a tyrosine‐based linker arm could be identified in a structure–activity relationship study. Molecular modeling of the glycoclusters bound to the lectin tetramer was also used to rationalize the binding properties observed.     

考虑溯源系统应用的优质农产品双渠道供应链决策研究

优质农产品溯源系统的引入,既能提升有效供给、缩短流通时间,又能降低流通中的数量损耗和价值损失,由此带来了双渠道供应链系统在投资、销售、定价等方面的系列决策问题。考虑制造商开辟电子渠道、从溯源系统降低流通损耗和提高质量出发,分别构建制造商主导型的双渠道供应链决策模型。通过对比分析应用前后各成员在投资、定价及销售方面的最优策略,得到相关的核心边界值。数值仿真结果表明:核心边界值主要与双重损耗的改善程度及其他参数相关,各成员及系统接受溯源系统的应用成本不同,应用成本对各渠道销量的影响程度亦不相同,但各成员调整定价的应用成本边界值是一致的。     

添加剂对锌铝尖晶石晶粒尺寸的影响

本文以氧化铝和氧化锌为原料,B2O3、Y2O3、TiO2为添加剂,采用固相反应法合成锌铝尖晶石,将试样在1550℃进行烧结,研究了三种添加剂对矿物组成和微观结构的影响,采用XRD、SEM等手段对烧后试样的物相组成和显微结构进行表征.结果表明:三种添加剂均使显气孔率显著降低,当含量超过1.5;时,显气孔率下降不明显.B2O3进入锌铝尖晶石间隙内形成间隙固溶体;Y2O3与Al2O3发生化学反应生成钇酸铝;当TiO2含量小于1.5;时,TiO2进入锌铝尖晶石晶格内形成置换固溶体,超过1.5;以后,TiO2与Al2O3反应生成钛酸铝.添加Y2O3的试样,生成的钇酸铝在锌铝尖晶石晶间,与空白样相比,晶粒尺寸更均匀;添加B2O3的试样,晶粒尺寸最大;其次是添加TiO2的试样.添加TiO2的试样抗KCl侵蚀性最好.     

熔盐堆空气换热器结构完整性分析

熔盐堆作为第四代核反应堆备选堆型之一,运行温度高,对材料高温性能要求严格;熔盐堆空气换热器作为实验堆关键设备,工作温度高,启停机次数多,长期运行后,材料许用应力松弛下降,应力、应变可能超出允许限值,或发生蠕变疲劳失效。使用Workbench软件,对熔盐堆空气换热器进行力学分析,并对A级使用载荷要求进行结构完整性评定,结果表明:熔盐堆空气换热器满足力学性能要求,其中疲劳损伤占比重较大,高温蠕变损伤也较为显著。     

Fabrication of extreme wettability patterns with water-film protection for organic liquids

Selective fabrication of superhydrophilic (S-philic) region on a superhydrophobic (S-phobic) surface requires complex technology and high cost, which has limited applications of extreme wettability patterns. In this paper, a twice-chemical-etching approach without special modification is used to prepare the extreme wettability patterns. Superhydrophobicity and superhydrophilicity can be successfully achieved after twice chemical etching for 20 seconds. The obtained patterns can maintain their extreme wettability for at least 30 days. Functional platforms with single-S-philic and multi-S-philic regions are fabricated to manipulate water and various organic liquids with water-film protection in an air environment.     

《中国药典》在药物分析实验教学中的应用

总结了《中国药典》在药物分析基础性实验、综合性实验以及设计性实验中的应用。实践表明,将《中国药典》用于药物分析实验教学,可培养学生正确学习和使用《中国药典》,形成良好的理论与实践相结合的教学模式,取得良好的教学效果。     

Inducing new secondary metabolites through co-cultivation of the fungus Pestalotiopsis sp. with the bacterium Bacillus subtilis

Two new lactones, pestalotiolactones A (1) and B (2), together with three known compounds (3–5) were isolated from the axenic culture of the endophytic fungus Pestalotiopsis sp., obtained from fruits of Drepanocarpus lunatus (Fabaceae). Co-culture of this fungus with Bacillus subtilis afforded two new sesquiterpenoids pestabacillins A (6) and B (7) as well as eight known compounds (8–15). Their structures were elucidated by extensive analysis of the NMR and MS data as well as by comparison with literature data. All isolated compounds were evaluated for their cytotoxic and antimicrobial activities but proved to be inactive.     

High-reflectivity non-periodic sub-wavelength gratings with small-angle beam-steering ability and its application in Fabry–Perot cavity

We report a high-reflectivity non-periodic sub-wavelength gratings (SWGs) mirror with small-angle beam-steering ability for reflect light. It presents a distinctive characteristic of flexibly controlling the width of oscillation optical field for the improved Fabry–Perot (F–P) cavity. We propose a detailed principle analysis of the improved cavity. By finding out a set of SWGs with the designed structural parameters, both high reflectivity (>?93%) and beam steering (1°) can be implemented. By setting beam-steering angle and cavity length, we can control the width of oscillation optical field in the improved cavity. Beam steering ability and property of controlling the oscillation width are numerically investigated by finite element method. Simulation results prove that cavity length and steering angle can effectively control the main width of oscillation optical field, and the width is linearly associated with the cavity length.